top of page
  • Writer's pictureBaylee Modugno

Things to Consider before you Use Power Washing at Home

If you're looking for a way to get rid of the dirt and grime built up on your home, then this is one option. With so many available products out there, it can be hard to figure out which one will work best for you. Especially places like long island power washing, New York, Suffolk County, and Nassau county. In this post, we'll take a look at things to consider before using power washes around your house!

1) Is my house built with brick or wood for pressure cleaning near me?

- If it's made of brick, then you'll want to avoid using power washes as they can damage the bricks and leave stains. For wooden siding, be sure to use chemicals designed for those types of surfaces, not further damage.

2) Does my house have any windows?

- If so, be sure to cover them before using them. It's also a good idea to avoid spraying the siding with chemicals designed for glass because they can damage it if sprayed directly on or around your windows.

3) How old is my house?

- If your home was built before 1978, it likely has lead paint. You'll want to stay away from it altogether because even the pressure washing of a power wash can release particles into the air that you and your family breathe in daily. It's best to avoid this cleaning entirely if you think there could be lead paint near where you're spraying!

Another thing that older homes have are asbestos shingles which will become airborne when they get wet, posing a hazard for anyone who may inhale them while they settle back onto roofs or sidewalks once dry. To keep yourself safe, make sure to cover any attic vents and all of your doors and windows with plastic to keep any chemicals from entering your home while you're washing.

With older homes, the mortar between bricks will likely be complex and flaky, leading to de-lamination if sprayed with high-pressure water. You'll want to make sure not only to avoid power washes but also other types of cleaning like harsh chemicals or scraping as these could cause even more damage than leaving grime alone!

4) Is my house painted already?

- Depending on the type of paint, power washes can cause it to fade or peel faster. If you have a newer home with low VOC paints, feel free to use whatever chemicals you want as long as they are safe for your surfaces! Older homes with lead paint should avoid using harsh chemicals around their siding because these could damage both the mortar between bricks and other areas where there might be lead paint. In this case, the best thing to do is leave grime alone until you're ready for some major renovations down the road!

If your exterior walls are brick but not painted at all, cleaning with pressure washing them will make them look brand new again without having stained or discolored bricks. If you have a home like a place in long island that has painted brick, then be sure to avoid any high-pressure washes as they will damage the paint even if it's been there for years, just like long island pressure washing.

5) Do I have any fences for pressure cleaning near me?

- If you do, then use chemicals that are safe for both wood and metal if possible. If your fence is made of untreated lumber or has been previously power washed in the past year, avoid using anything on it that will leave a residue behind because this could get into the soil underneath your fence where plants may grow!

If you can't find chemicals that work well with wooden fencing but don't want to damage the paint either, there's always another option: scrape off all old peeling paint down to bare wood and re-paint everything before applying pressure washes again. This way, you won't be left with streaks from clumps of dirt in between boards when they dry! The washes are a piece of cake as long as they don't rust in metal. If you do, be sure to use chemicals that won't further damage the paint before applying high-pressure water, such as long island pressure washing.

6) How much time do I have?

- Depending on how long your house has been dirty, you'll want to choose the right chemicals for the job. If it's just a matter of days before guests come over and all they see is dirt, then try using some store-bought cleaners that are diluted with water instead of harsh chemicals like bleach or ammonia from Nassau county. These can be used safely around windows, so there won't be any streaks left behind after everything dries! Avoid letting these sit too long because if they dry onto surfaces, they will leave a residue that could look bad and cause damage in the future when trying to remove them again!

If you're looking at doing more than just washing outside for one big project - whether it's painting, replacing some wood, or even renovating an entire room - then you'll want to save your exterior power washing for after all that is done. If you don't have time until after the holidays but are looking forward to getting rid of dirt and grime once it's spring again, use store-bought cleaners so everything will be ready for when high-pressure washes can finally happen to places like long island power washing!

7) Will I be using chemicals?

- If you are, make sure to check the label for any specific instructions on how much water should or shouldn't be used. It's always good practice to dilute store-bought cleaners with one part cleaner and five parts water before applying it because this will reduce damage if anything is spilled onto surfaces by accident! Store-bought cleaners typically aren't as strong as homemade ones, so they also don't take nearly as much elbow grease to use, which makes cleaning with the pressure washing that much easier without worrying about damaging your hands in the process. Just keep in mind that whatever chemical you choose needs time to break down dirt before high-pressure washes can be done safely; otherwise, there could still be streaks left behind even after everything dries in places like long island!

If you're using store-bought cleaners to clean with, then you'll also want to make sure that your pressure washer has a high enough PSI (pounds per square inch) rating. The higher the PSI for your machine is, the more effective it will be when getting rid of dirt and grime because there's just no way around it: it only works if there's water coming out!

8) Is my home freshly painted?

- If it's not, then you may want to wait until after your next coat from New York is applied before power washing because the high pressure of the water could damage paint that isn't thoroughly dried yet. From personal experience, I know sometimes this can happen even when waiting for a second day, but no matter how many times you read something in an instruction manual, accidents will still happen! To avoid these mistakes altogether, use store-bought cleaners instead and be careful about using anything with bleach or ammonia as they both take time to dry and shouldn't be used around windows unless there's already enough ventilation going on.

If everything has been recently re-painted, though (and nothing else needs attention outside), then feel free to bring out those chemicals if you're looking to speed up the cleaning process. Just keep in mind that if you don't use store-bought cleaners and instead go with homemade ones, then be sure not to let them dry onto surfaces because they will leave a residue!

9) What type of surface will I be cleaning?

- If it's brick, masonry, or even rough surfaces like stucco in Suffolk county, then you'll want to use store-bought cleaners because they are made with the right chemicals that don't damage these materials. That goes for getting rid of any moss, too - store-bought cleaners won't cause more harm than good in this case! Just make sure not to let anything sit on surfaces. If using bleach or ammonia (or homemade solutions), always wear protective gear while power washing so there isn't risk involved when spraying things down after everything has dried.

If your home is painted, vinyl siding, or wood, though, then stay away from harsh chemicals because they can damage each of those types of exterior finishes! Not only that, but it's also essential to keep in mind that pressure washing doesn't work on shingles at all, so a different method will need to be used if you're looking for anything more than just creating uniformity.

6 views0 comments

Recent Posts

See All


bottom of page